This chapter describes how to configure static routing on the Cisco NX-OS device. Routers forward packets using either route information from route table entries that you manually …

If the network topology is simple enough, you can use static routes for the network's routing requirements. The proper configuration and usage of static routes can improve network …

In this lab, you will manually configure a static route to a specified distant network based on a next-hop IP address or exit interface. You will also configure a static default route.

To ensure a static route remains permantly in the routing table, even if the next-hop interface is down: Normally, if a specific route to a particular network does not exist, a router will drop all …

a) In the Routing Table page of Switch2, add a static route entry with Switch1’s server farm subnet to the routing table; and indicate the “Next Hop IP address” to that subnet, or Figure 10 …

In order to configure static routing in Cisco IOS routers, this is the command to use. The IP route command includes the destination network followed by a mask and so you can insert CIDRE …

The process of adding static routes to the routing table is known as static routing. Dynamic routing is all about configuring a network using dynamic routing protocols. Let’s take a packet tracer …